| |
| In association with |  |
| | |
|  | |
| | |
| Amana Straight Bit | | 
|
| Item No. | Item | Price | | 95100 | Amana Straight Bit 9/16D x 1-1/4L x 1/2S | $19.99 |
| Warning: Maximum RPM 12! = 12,000; 16! = 16,000; 18! = 18,000; 20! = 20,000; 22! = 22,000 |  |
| | | 1/2" Shank - 2 Flute | | Tool No. | D | B | d | L | | 95100 | 9/16 | 1-1/4 | 1/2 | 2-7/8 |
|
 If you are not 100% satisfied with these bits, send them back for a refund.
Router Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2" shank router bits whenever possible. 1/2" shanks provide better stability with less vibration to produce a smoother cut and longer cutter life.
2) Make multiple light passes rather than one heavy cut.
3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch.
4) Use a router table whenever possible.
5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber.
6) Always follow your router manufacturer's recommendations. |
Click here for details
All brands and product names are trademarked or
registered trademarks of their
respective companies.
Prices, specifications, and availability are subject to change without notification.
E.&O.E.
Image & Description provided by and used with permission from Rockler Companies, Inc..
Page revised: Monday, April 9, 2007.
This page is at http://www.shopmontgomerystore.com/woodworking/go/10919
|
