Uniquely situated in Orange County, NY, Montgomery, NY offers the best of Shopping,
Professional Services, Restaurants and Transportation in a small town atmosphere.
Made with K10 and K20 grade carbide for clean cutting action and final sharpened with 400 grit diamond wheels for longer cutting life. All with 1/4" shanks. Includes bearing to convert all bits from roundover to beading, giving you six options! Includes 1/8", 1/4" and 3/8" radius bits.
If you are not 100% satisfied with these bits, send them back for a refund.
Router Safety Tips: It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2" shank router bits whenever possible. 1/2" shanks provide better stability with less vibration to produce a smoother cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
All brands and product names are trademarked or registered trademarks of their
respective companies. Prices, specifications, and availability are subject to change without notification.
E.&O.E. Image & Description provided by and used with permission from Rockler Companies, Inc.. Page revised: Monday, April 9, 2007.
This page is at http://www.shopmontgomerystore.com/woodworking/go/10328
If you are not 100% satisfied with these bits, send them back for a refund.