Mast-R-Lift, Table and Fence PLUS Porter-Cable 7518 Router

Porter-Cable 7518 Router PLUS Mast-R-Lift, Table and Fence
Package includes Porter-Cable 7518 router and our Mast-R-Lift, Table and fence system that offers fine adjustments from the top of your table for easier, safer routing. Put this router motor in the Mast-R-Lift and you're ready to rout! Motor has electronic five-speed with soft start.
(22676) Porter-Cable 7518 Router & Mast-R-Lift Package features Five-speed router with soft start maintains constant speed under load 3-1/4 Peak HP Auto-release collet system ends frozen bits Unique design puts bottom bearing closer to work for minimum bit run-out and vibration With 1/2" collet Now change bits and adjust the depth of cut n increments less tha 1/128", all from the top of the table! Designed to accomodate Porter-Cable 7518 motor. Mast-R-Lift is precision-engineered to within .002" tolerance and CNC-machined from 1" solid aluminum to eliminate bending and sagging. Built-in insert adjusters allow for snugging the lift in your table for a perfect fit, while the built-in leveling system will not wear into the table's recessed opening Plate measures 9-1/4" x 11-3/4" x 3/8". Adjustments are made with a drop-in speed handle that's elevated from the table. Fence has 32" long anodized aluminum angle that's machined to within .010" Includes bit safety guard

Mast-R-Lift Plate (60146) is precision-engineered to within .002" tolerance and CNC-machined from 1" solid aluminum to eliminate bending and sagging. The plate is 9-1/4" x 11-3/4" x 3/8" thick and it comes with a 1-1/2" insert. The opening in the plate without the insert is 3-1/2" diameter.

Tab-Loc Inserts (24686)
Our 4-piece locking insert kit includes 1/4", 1/2" and 1-1/4" inserts for template bushings plus a 2 -1/2" insert. Sold separately.
(Mast-R-Lift comes with a 1-1/2" insert.) Phenolic resin.

One rotation of the handle equals 1/16"
so you can make both super-fine and major adjustments quickly and easily.

image of bottom of router lift Built-in insert adjusters allow for snugging Mast-R-Lift into your table for an absolutely perfect fit, while the built-in leveling system will not wear into your table's recessed opening.

Other features that ensure smooth operation include a carriage that rides on four SAE 841 sintered bronze bearings within two ground and polished guide shafts. Adjustments are made with a drop-in speed handle that’s elevated from the table for safety.

image of bits being changed from the top of the table while router is in place

Changing bits with Mast-R-Lift has never been easier!

All your router bits are changed from the top of the table-the quickest and safest way to change bits.

Eliminator Chuck (22705)
Adjust bits with one hand!
No more knicking your fingers and hands with the clumsy two-wrench system.
(See image on right.)

This chuck accepts 1/2" shank router bits.

Adapter available for 1/4" bits. (90497)

Installation Template (60804)
Fit your Mast-R-Lift perfectly with our 1/2" thick MDF template!

Designed to work with our 1/2" pattern bit (33536) or other 1/2" pattern bits (shims may be required).

Mount with double-faced tape. (50492)

Mast-R-Lift is designed to accommodate Porter-Cable 75182 motors (sold separately). The Mast-R-Lift cannot be adapted for Plunge Routers.
Adapter rings (sold separately) are available for

PC 690, PC 890, Bosch 1617/1618 EVS Router
DeWalt 610 Router
Makita 1100-01 Router

Mast-R-Lift Table
The Mast-R-Lift Router Table is a large 24 by 32" table made of 1-1/8" MDF (Medium Density Fiberboard) and surfaced with melamine on both sides. Includes an aluminum miter track.

The precision fence features a 32" long anodized aluminum angle that's machined straight and flat for exact cuts. It includes two 16" melamine faces that can be adjusted to minimize the gap around the router bit. The faces include a T-slot for universal positioning of all accessories. The fence attaches to the table with a simple T-bolt system and comes with a bit safety guard.

Optional Accessories

Optional router table leg accessories available: Steel Router Table Leg Set (4 Legs, 8 Stretchers) & Pine Router Table Leg Set.

Steel Router Table Leg Stand

Pine Router Table Leg Set