Titebond™ Heavy-Duty Construction Adhesive

• Type: Synthetic elastomeric polymer.
• Weight/gallon: 9.0 lbs.
• State: Medium-viscosity mastic.
• Flashpoint: Less than 0"F.
• Color: Light tan.
• Freeze/thaw stability: Will not freeze.
• Solids: 65%.
• Viscosity: 130,000 cps.
• Storage life: 12 months in tightly closed containers at 75"F.
• Calculated VOC (less exempt solvent): 282 g/L.

Application Guidelines...

• Application temperature: 0"F. to 100"F.
• Service temperatures: -20"F. to 120"F.
• Method of application: Cartridge/caulking gun
• Working time: Approx. 20-30 minutes for a 1/4" bead
• Working surfaces Surfaces to be bonded should be clean and free from excessive oil, grease, water, dirt or any other material that may deter adhesion.
• Apply Titebond Heavy Duty Construction Adhesive to only one of the surfaces to be bonded.
• NOTE: When bonding subfloors or wet, frozen and treated lumber, nail or screw as recommended by the American Plywood Association.
• Cleanup: Scrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor’s precautions when using solvents.
• NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.

Maximum Coverage 10.5 oz. Cartridge:

• 1/8" bead — 129 ft.
• 1/4" bead — 32 ft.
• 3/8" bead — 14 ft.

Maximum Coverage 29 oz. Cartridge:

• 1/8" bead — 355 ft.
• 1/4" bead — 89 ft.
• 3/8" bead — 39 ft.